AEM Series 2 AEMnet Adapter for 30-6030
Please note: This item is currently on backorder and may take 1-2 weeks before it goes out. You can still purchase it now and it will go out as soon as it is ready. If you would like an updated time estimate, please contact us before you purchase. For domestic orders, it will get sent to you directly from the manufacturer. For international and Canada orders, it will get sent to our shop first, then we will send it out to you.
AEMnet Adapters allow users to connect their Series 2 EMS to other AEMnet enabled devices. AEMnet is AEM's open architecture software and hardware interface based on the CAN 2.0 specification. which allows multiple enabled devices to communicate with each other through a single cable. These adapters allow you to connect your Series 2 EMS to:
- 4-Channel Wideband UEGO Air/Fuel Ratio Controller
- Wideband Failsafe Device
- AQ-1 Data Loggers
This listing is for AEMnet adapter part number 30-3430 only. The AEM engine management system part number 30-6030 is available for purchase separately in our store.
This product fits the following vehicles:
- 2002 to 2004 Acura RSX 2.0L VTEC
- 2002 to 2004 Acura RSX Type S 2.0L VTEC
- 2001 to 2005 Honda Civic DX, LX 1.7L
- 2001 to 2005 Honda Civic EX 1.7L VTEC
- 2002 to 2005 Honda Civic Si 2.0L VTEC
- 1996 to 2000 Honda Civic w/K20A2 Swap 2.0L VTEC
- 1992 to 1995 Honda Civic w/K20A2 Swap 2.0L VTEC
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE AT HTTP://WWW.SEMASAN.COM/EMISSIONS FOR STATE BY STATE DETAILS).
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Series 2 Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation. Refer the installation to an AEM-trained tuning shop.
NOTE: All supplied AEM calibrations, Wizards and other tuning information are offered as potential starting points only. IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE. AEM and Phoenix Tuning hold no responsibility for any engine damage that results from the misuse or mistuning of this product!