|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAKOTA DIGITAL CYLINDER HEAD TEMPERATURE SENDER - SEN-11-4
Available in 4 lengths:
- SEN-11-4 - 6 foot
- SEN-11-5 - 10 foot
- SEN-11-6 - 14 foot
- SEN-11-7 - 18 foot
- SEN-11-8 - 18 foot for 14mm Spark Plugs
*All senders have a 1/2" diameter ring terminal with the exception of the SEN-11-8.
Price: $11.95
|
|
|
|
|
DAKOTA DIGITAL DIESEL TACHOMETER FLYWHEEL ADAPTER DSL-2
The DSL-2 consists of an DSL-1 speedometer signal interface unit and a inductive gear tooth sensor. This unit will convert a signal from the flywheel-gear tooth sensor to an ignition tachometer signal. When using a standard 4-6-8 cylinder tachometer on a diesel engine the DSL-2 can convert the flywheel sensor signal into a 4 cylinder gas ignition signal. Calibration is accomplished by counting the number of teeth on the flywheel or using another tachometer as reference. The sensor should be mounted so the flywheel teeth pass by the end of the sensor.
Price: $105.00
Retail: $114.95
You Save: $9.95 (9%)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAKOTA DIGITAL UNIVERSAL DIESEL TACH ADAPTER DSL-1 NEW
The DSL-1 Universal Diesel Tachometer Adaptor will accept a signal from the "W" terminal found on some diesel alternators (not all alternators used on diesel engines have this extra terminal) and converts the signal into a tachometer signal for a 4 or 8 cylinder standard ignition system tachometer. The DSL-1 is adjustable to allow for the different numbers on the alternator as well as different pulley sizes on the engine and alternator. Calibration should be done using a light tach or another known reference for speed.
Price: $66.45
Retail: $69.95
You Save: $3.50 (5%)
|
|
|
|
|
|
|
|
|
Sign In
